Xerox N2125N - DocuPrint B/W Laser Printer, Service Manual

Page: 261 / 335

02/2000
6-22 DocuPrint N2125
GP 2.9 , GP 2.10
Initial Issue General Procedures / Information
GP 2.9 To Reset Fuser
1. Power down printer.
2. Simultaneously hold keys 2 and 6 down.
3. Power up printer, wait for message "IOT?" to appear on the LCD.
4. Release both keys, then simultaneously press keys 0 and 5 to activate the fuser reset
function. If keys 0 and 5 are not pressed within 5 seconds of the "IOT?" message, printer
will go to the normal boot process.
5. Wait for message "Reset Completed. Please reboot" to appear on the LCD then release
both keys.
6. Power off, power on.
GP 2.10 Reset Menu
1. Power down printer.
2. Simultaneously hold keys 0 and 4 down.
3. Power up printer, wait for first * to display on the LCD line 1 then release both keys.
4. Let printer go to Ready mode.
5. Press 1 or 5 to scroll to Reset Menu.
6. Press 2 or 6 to select Reset items (Table 1)
7. Press 3 or 7 to change the values.
NOTE: After execution all values except Demo Mode will return to "Default" value
8. Press Enter to execute.
Table 1 Reset Menu
Reset Menu Item Reset Menu Values
Factory Defaults Yes (resets USB, System PCC, Tray, and Par-
allel menu).
No (default)
Network Defaults Yes (resets Ethernet and Novell menu).
No (default)
Demo Mode Yes
No (default)
Delete All Jobs Yes (Hard drive installed)
No (default)
Disk Initialize Yes (Hard drive installed)
No (default)
Disk Format Yes (Hard drive installed)
No (default)
Flash Format Yes (Flash DIMM installed)
No (default)