Xerox N2125N - DocuPrint B/W Laser Printer, Service Manual

Page: 24 / 335

02/2000
2-7 DocuPrint N2125
Error Code Tables
Status Indicator Repair Analysis Procedures Initial Issue
Exit Jam 2 Exit Jam -
Open Rear Cover E4-3 E4-3: Exit Jam Custom Paper late off Exit Sensor
within a specified time from Registra-
tion Sensor. Open Rear Cover
Clear Paper Path
Change Paper Setting in Cus-
tom Mode to correct size.
Go to
RAP 11 .
Close Front Cvr
Close Rear Cvr E5: FRNT/Rear Cover 1. Front cover interlock is open.
2. Rear cover interlock is open. Close Front Cover
Close Rear Cover
Go to
RAP 12 .
E-5: Face Up Open Face Up Tray is open. Close Face Up Tray
Check Actuator
Check Sensor
Go to
RAP 51 .
Jam in the OCT Offset Jam -
Open Rear Cover E6-1 E6-1: OCT Jam 1. Paper late to OCT Sensor. Open OCT Rear Door
Clear Paper Path
Open Printer Rear Cover
Clear Paper Path
Go to
RAP 57
OCT Jam Offset Jam -
Open Rear Cover E6-2 E6-2: OCT Jam Paper late off OCT Sensor.
OCT Sensor on at Power On Open OCT Rear Door
Clear Paper Path
Go to
RAP 57
Paper Jam -
Open Front Cover E7-0 E7-0: Duplex Jam Paper arrives at Registration Sensor
early from Duplex Sensor. Open Front Cover
Clear Paper Path
Go to
RAP 56 .
Paper Jam -
Open Rear Cover E7-1 E7-1: Duplex Jam Paper late to Duplex Sensor Open the Rear Cover
Remove Duplex Unit Clear
Paper Path
Go to
RAP 56 .
Duplex Jam 3 Paper Jam -
Open Rear Cover E7-2 E7-2: Duplex Jam 1. Paper late off Duplex Sensor.
2. Duplex Sensor on at power up. Open Rear Cover
Remove Duplex Unit
Clear Paper Path
Go to
RAP 56 .
Duplex Jam 4 Paper Jam -
Open Rear Cover E7-3 E7-3: Duplex Jam Paper late to Registration Sensor
from Duplex Sensor. Open Rear Cover
Remove Duplex Unit
Clear Paper Path
Go to
RAP 56 .
Duplex Unit Fail or
Removed E9-1 E9-1: Duplex Fail Duplex module removed while power
is on. Reinstall Duplex Module
Go to
RAP 55 .
Offset Bin Fail
Power Off/On E9-2 E9-2: OCT Fail OCT removed while power is on. Switch Power Off
Remove and Reinstall OCT
Switch Power On
Go to
RAP 58 .
Envelope Feeder Fail or
Removed E9-E E9: EBF Unit Fail Envelope Feeder module removed
while power on. Reinstall Envelope Feeder
Go to
RAP 62 .
Tray 2/3 Failure
Power Off/On E11 E11: Tray 2/3 Fail Trays 2/3 disconnected after power
on. Reinstall Trays 2/3
Go to
RAP 54 .
Table 1 Error Code Table
General Info Control Panel Message Fault History Entry Diagnostic Message Error Description Action
manuals4you.com manuals4you.com