Xerox N2125N - DocuPrint B/W Laser Printer, Service Manual

Page: 211 / 335

02/2000
4-112 DocuPrint N2125
REP 13.16
Initial Issue Repair-Adjustment
REP 13.16 Feed Roll Assembly 2
Parts List on PL 12.2
Removal
WARNING
Switch off the power and disconnect the Power Cord.
1. Remove the Envelope Feeder from the printer.
2. Remove the Bottom Cover ( REP 13.1 ).
3. Remove the Top Chute ( REP 13.2 ).
4. Remove the Envelope Feeder PWB ( REP 13.3 ).
5. Remove the Gear Cover ( REP 13.11 ).
6. Remove the Torque Clutch and Bearing from the Feed Roll Shaft ( Figure 1 ).
7. Slide the Feed Roll Shaft and Bearing to the left until it is free of the right mounting ( Figure
2 ).
8. Remove the Feed Roll Assembly 2 ( Figure 2 ).
9. If replacing the feeder rolls, remove the feeder rolls from the assembly ( Figure 3 ).
Figure 1 Torque Clutch and Bearing
Figure 2 Feed Roll Shaft
Figure 3 Feed Roll Assembly 2
Replacement
1. Reinstall the components in the reverse order.