Xerox N2125N - DocuPrint B/W Laser Printer, Service Manual

Page: 198 / 335

02/2000
4-99 DocuPrint N2125
REP 12.10, REP 12.11
Repair-Adjustment Initial Issue
Figure 2 Middle Roll Assembly
Replacement
1. Reinstall the components in the reverse order.
REP 12.11 Front Roll Assembly
Parts List on PL 13.2
Removal
WARNING
Switch off the power and disconnect the Power Cord.
1. Remove the Duplex Assembly ( REP 12.1 ).
2. Release the tabs and open the Upper Chute Assembly ( Figure 1 ).
3. Release the locking tab and remove the Front Belt Stopper ( Figure 1 ).
4. Remove the Synchronous Belt from the Pulley ( REP 12.12 ).
5. Remove the Drive Gear ( Figure 1 ).
6. Use a small screwdriver to release the left and right bearings ( Figure 1 ).
7. Lift the Roll Assembly and move it to the left until the right end is free ( Figure 2 ).
8. Remove the Front Roll Assembly ( Figure 2 ).
Figure 1 Locking Tab and Front Belt Stopper
manuals4you.com manuals4you.com