Xerox N2125N - DocuPrint B/W Laser Printer, Service Manual

Page: 168 / 335

02/2000
4-69 DocuPrint N2125
REP 10.4, REP 10.5
Repair-Adjustment Initial Issue
REP 10.4 Rear Cover Assembly
Parts List on PL 14.1
Removal
WARNING
Switch off the power and disconnect the Power Cord.
1. Remove the Offset Catch Tray ( REP 10.1 ).
2. Remove the Exit Tray extension ( REP 10.2 ).
3. Remove the Exit Tray ( REP 10.3 ).
4. Turn the Offset Catch Tray upside down.
5. Remove the Lower Cover ( REP 10.5 ).
6. Remove the Inner Exit Chute Assembly ( REP 10.6 ).
7. Release and remove the two Rear Cover Springs ( Figure 1 ).
8. Remove the six screws that secure the Rear Cover ( Figure 1 ).
9. Remove the Rear Cover.
Figure 1 Rear Cover Assembly
Replacement
1. Reinstall the components in the reverse order.
REP 10.5 Lower Cover
Parts List on PL 14.1
Removal
WARNING
Switch off the power and disconnect the Power Cord.
1. Remove the Offset Catch Tray ( REP 10.1 ).
2. Carefully turn the Offset Catch Tray upside down.
3. Remove the six screws that secure the lower cover ( Figure 1 ).
4. Remove the Lower Cover ( Figure 1 ).
Figure 1 Lower Cover
Replacement
1. Hold the Stack Height Sensor Actuator out as you reinstall the lower cover.
2. Reinstall the components in the reverse order
manuals4you.com manuals4you.com