Xerox N2125N - DocuPrint B/W Laser Printer, Service Manual

Page: 166 / 335

02/2000
4-67 DocuPrint N2125
REP 10.1, REP 10.2
Repair-Adjustment Initial Issue
REP 10.1 Offset Catch Tray (OCT)
Parts List on PL 14.1
Removal
WARNING
Switch off the power and disconnect the Power Cord.
1. Open the printer Rear Cover.
2. Press the two locking tabs at the rear of the Offset Catch Tray ( Figure 1 ).
3. Lift the rear of the Offset Catch Tray approximately 1 inch (25mm).
4. Slide the Offset Catch Tray toward the rear and remove ( Figure 1 ).
Figure 1 Offset Catch Tray
Replacement
1. Reinstall the components in the reverse order.
REP 10.2 Exit Tray Extension
Parts List on PL 14.1
Removal
WARNING
Switch off the power and disconnect the Power Cord.
1. Open the Exit Tray Extension.
2. Slide the tray to the left.
3. Carefully deflect the center of the tray until the right hinge pin is free ( Figure 1 ).
4. Slide the tray to the right and remove ( Figure 1 ).
Figure 1 Exit Tray Extension
Replacement
1. Reinstall the components in the reverse order.
manuals4you.com manuals4you.com