3-2
XEROX DFC165 & DWC165c Service Manual
3.1.2 Connecting to the Telephone Line
WARNING
:
check that the
power cable
is
plugged into the power outlet
,
before connecting the facsimile machine to the telephone line.
To connect the
facsimile machine
to the telephone line, plug one end of the
telephone cable to the line socket (LINE) on the facsimile machine and the other end
into a wall socket (see Fig. 3-1, a) or using the adapter if necessary (see Fig. 3-1, b).
Fig. 3-1 Connecting the facsimile machine to the telephone line
To connect a
telephone
to the telephone network, proceed in either of the following
two ways:
a) if the telephone has a national plug (case a), insert the plug into the adapter
(see Fig. 3-2, a) or specific wall telephone socket (see Fig. 3-2, b)
b) if the telephone has an international connector (case b), remove the precut
tab that covers the telephone socket (TEL1) of the facsimile machine, then
insert the connector directly into the telephone socket (see Fig. 3-3).
Important
As the telephone connection depends on regulations that vary from one country to
another, figures 3-2 and 3-3 show an intentionally generic connection: for a detailed
description of the procedure, see the regulations in force in your own country.
a)
b)
line socket
(LINE)
