7-12
XEROX DFC165 & DWC165c Service Manual
screw
screw
7.2.2 Removing the Casing
1) Remove the document tray and the automatic sheet feeder.
2) Tilt the operator console, remove the two screws securing the front part of the
casing (see fig. 7-15) and pull this part of the casing upwards.
Fig. 7-15
Warning
:
during reassembly, make sure that the tabs on the rear of the casing are
correctly inserted in the slots on the base (see fig. 7-16) and that the flat
cables running along the sides of the base are not bent.
Fig. 7-16
tab
slot
