XEROX DFC165 & DWC165c Service Manual
11 - 6
9
On completion of the installation procedure, a
dialog box prompting you to restart the system
appears:
Click on
OK
to confirm; the system is restarted
automatically.
If you have installed the
Utility mod-
ule
, the
LinkFax group 8
icon ap-
pears automatically when Windows
3.1x is restarted.
10
Double click on the group icon to check that it
has been installed correctly:
UPDATING THE LINKFAX 8 MODULE
Having performed the initial installation of the
LinkFax 8 module, you may need to carry out
one of the following procedures:
•
Adding components
to a previous partial
installation: repeat the installation procedure
by selecting the required elements.
•
Updating the current version
of the mod-
ule: perform the installation procedure, re-se-
lecting the required components and applica-
tions. During installation, any elements that
were not included in the previous version will
be
added
and the existing elements will be
updated
.
WARNING
If, during installation, you select the same
destination path used for the previous instal-
lation, the new version of the
LinkFax 8
mod-
ule will overwrite the old one. If, on the other
hand, you select a different destination path,
you will have two versions of the module in-
stalled
UNINSTALLING THE LINKFAX 8 MODULE
IMPORTANT
The LinkFax 8 module can
only be
uninstalled manually, by deleting files and
directories from the hard disk
. Since this
operation requires a certain degree of
experience,
make sure that a competent
member of staff is present
.
1
Double click on
File Manager
, select the
Windows\System
directory and double click on
sysedit.exe
: All the relevant Windows files are
opened, one on top of the other.
2
If the file on top is not
Autoexec.bat,
or
Win.ini
,
close it by double clicking on the box in the left
hand corner and continue to close the rest of the
files until you come to the two files in question.
3
Delete:
•
the
call c:\casloc.bat
item from the
Auto-
exec.bat
file.
•
The
[LinkFax 8]
group (i.e. all the items listed
in it) from the
Win.ini
file.
Following each deletion, click on
Save
on the
File
menu and then
close
the file.
On completion of the two deletions, click on
Exit
on the
File
menu to return to
File Manger
.
4
Select the main directory (
c:\
) and delete the
casloc.bat
and
casloc.bak
files.
5
Delete the
c:\casdir
directory together with the
directory where the LinkFax 8 module is installed
