9-3
XEROX DFC165 & DWC165c Service Manual
This will ensure long life and efficiency of the
print head and a high print quality.
•
Try
not to get ink on hands or clothes,
as
it is very difficult to remove.
VERY IMPORTANT
The facsimile machine automatically recognises
the type of print head installed and checks the
level of ink remaining by means of a special inter-
nal counter. When there is no ink remaining, the
message
OUT OF INK
appears on its display.
In order for the ink level monitored by the internal
counter to be consistent with the actual level con-
tained the print head,
never install the print
heads of one facsimile machine onto another
facsimile machine or bubble ink jet printer
.
PRINT HEAD PRECAUTIONS
The bubble ink jet facsimile machine uses both
monochrome (black) and colour print heads:
•
monochrome
, for use with the
facsimile,
or
the
printer
in
black and white
mode;
•
colour
, for use with the
printer
in
colour
mode.
WARNING
When the colour print head is installed, the
documents received will
not be printed
straight away
, but stored in the memory of
the facsimile machine. Once the memory is
full, the facsimile will no longer be able to
receive documents, so
always remember
to
replace the monochrome print head each time
the facsimile is reset.
Since it will be necessary to change the print head
regularly, depending on what the facsimile is to
be used for, take note of the following precau-
tions:
•
do not touch, or stand
the print head on
the
ink jets:
... or the
contacts
:
•
never try to re-load
the print head, as this
could damage the print head or the facsimile;
•
always place the
print head not in use
in
the special container:
