9-8
XEROX DFC165 & DWC165c Service Manual
•
Complete the procedure by clicking on
OK
.
•
Click on the
Unredirect
button to restore
standard port management.
UPDATING THE LINKFAX 8 MODULE
Having performed the initial installation of the
LinkFax 8 module, you may need to carry out
one of the following procedures:
•
Adding components
to a previous partial
installation: repeat the installation procedure
by selecting the required elements. Since Fax
Manager cannot be selected, it will be rein-
stalled.
•
Installing a new version
of the current
module:
1
Carry out the installation procedure up to the
point where you have selected and confirmed
your mother language; this time a message
will appear informing you that
the module
is already installed
and giving instructions
on how to continue:
2
Continue by selecting the components and
applications you require: during the installa-
tion procedure the new elements will be
added
to those already installed in the pre-
vious version, and the existing elements will
be
updated
.
•
Confirm the
Select Port
button:
The
Redirect to Parallel
button is now ac-
tive.
•
Confirm the
Redirect to Parallel
button:
•
Select the
parallel port
to which you wish
to redirect the serial port (
LPT1
in the exam-
ple):
and click on
OK
to confirm:
