7-16
XEROX DFC165 & DWC165c Service Manual
4) For the
NCU board
, remove the remaining screw (see fig. 7-23).
Fig. 7-23
7.2.5 Removing the Motherboard and the System Firmware
1) Remove the power supply unit (see section 7.2.3)
2) Remove the screw on the base (fig. 7-24), free the cables from their clips, unplug
all the motherboard connectors and flat cables and pull the motherboard out from
the rear
Fig. 7-24
screw
NCU board
screw
