XEROX DFC165 & DWC165c Service Manual
5-9
5.2.3 Printing the Communication Protocol
Setting
Display
1) The facsimile machine is in standby mode.
b)
E nter "
service
" mode and select PRINT PROT. DUMP
c) Make sure that there is paper in the ASFand then press
START
: the data shown in fig. 5-1 will be printed and then
the facsimile machine will return to standby mode.
Fig. 5-1
The protocol status is presented, session by session, by means of the following fields:
TIMER
Indicates the times, in
minutes : seconds
, at which the signals were
exchanged during the session
LOCAL
Indicates the signals, represented by a
hexadecimal code
and a
mnemonic code
, sent by the local facsimile machine
REMOTE
Indicates the signals sent by the correspondent's facsimile machine
FIF
Indicates the
structure of the signals
(FIF = Facsimile Information
Field) in hexadecimal code.
AUTOMATIC RX
09-05-95 14:58
PRINT PROT DUMP
START/STOP/
←
/
→
PRINT PROT.DUMP
START/STOP
