Xerox DocuColor 3535 User Manual Download Page 22

Page: 22 / 268

1 – 4

Xerox DocuColor 3535 Printer/Copier

Control Panel

The Control Panel is used to program individual jobs.

•

The

Numeric

Keypad

is used to enter copy quantity or other

numeric information.

•

The

Contrast Dial

adjusts the brightness of the touch screen.

•

The

Touch Screen

is where you make selections for the jobs

you are programming.

Language

Use this feature to change the language on the Touch Screen. The
language set will remain until the machine is powered off/on.

Access

Use this feature to change machine default settings, and to create
or modify user access numbers.

Power Saver

Lights up green and is initiated automatically if the machine is left
idle for a specific amount of time. Press the

Power Saver

button

to bring the machine back to full power after the warm-up period.

Contrast Dial

Touch Screen

Numeric Keypad

Summary of Contents for DocuColor 3535













































































































































































































































































Search results

Summary of Contents for DocuColor 3535

Reviews:

Related manuals for DocuColor 3535

Brands by name

Popular brands

Xerox DocuColor 3535, User Manual

Search results

Summary of Contents for DocuColor 3535

Reviews:

Related manuals for DocuColor 3535

Brands by name

Popular brands