Xerox ColorQube 8700, System Administrator Manual

Page: 84 / 207

Security
84 ColorQube 8700/8900 Color Multifunction Printer
System Administrator Guide
Creating a New Action
1. Click Actions at the top of the IPsec page.
2. Click Add New Action .
3. On the Step 1 of 2 page, under IP Action Details, type in the Name. This field is required.
4. In the Description field, type a description for the action, if desired.
5. Under Keying Method, select Manual Keying or Internet Key Exchange (IKE) .
Note: Select Manual Keying if client devices are not configured for or do not support IKE.
6. If you selected IKE, under Pre-shared Key Passphrase, type the passphrase, then click
Next
.
Configuring Manual Keying Settings
Manual Keying is used when client systems either do not support IKE or are not configured for IKE.
1.
Under IPsec Mode, select Transport Mode or Tunnel Mode .
Note: Transport mode only encrypts the IP payload, whereas Tunnel mode encrypts the IP header
and the IP payload. Tunnel mode provides protection for an entire IP packet by treating it as an
Authentication Header (AH), or Encapsulating Security Payload (ESP).
2. If you selected Tunnel Mode, under Enable Security End Point Address, select the address type.
Options are
Disabled , IPv4 Address , or IPv6 Address .
3. Under IPsec Security, select ESP , AH , or BOTH .
4. In the Security Parameter Index: IN field, type a 32-bit number larger than 256 that identifies the
inbound Security Association (SA).
5. In the Security Parameter Index: OUT field, type a 32-bit number larger than 256 that identifies the
outbound Security Association (SA).
6. Under Hash, select from the following:

SHA1

None
7. Under Enter Keys as, select ASCII format or Hexadecimal number .
8. Type a 20-character ASCII key, or 40-character Hexadecimal key for the following:

Hash Key: IN

Hash Key: OUT
9. If you selected ESP or BOTH for the IPsec Security type, select one or more of the following
Encryption types:
Note: If the IPsec Security type is set to AH, the Encryption type options do not appear.

AES

3DES

None