Security
64
ColorQube 8700/8900 Color Multifunction Printer
System Administrator Guide
Configuring Smart Card Authentication Settings
When Smart Card authentication is configured, users swipe a pre-programmed identification card at the
control panel. Purchase and install a Smart Card reading system before configuring Smart Card
authentication.
To configure access rights using Smart Card authentication:
Provide information about your domain controller servers and configure Domain Controller and NTP
settings.
If you want to validate certificates, configure Certificate Validation options and provide information
about your OCSP server.
If needed, configure Smart Card Inactivity Timer settings.
If needed, specify the method the printer uses to acquire the email address of a user by configuring
email Smart Card Policies.
If you want a custom image to appear at the control panel, import your image.
Configure Authorization settings.
If you enabled Personalization, configure LDAP server settings.
The Xerox Access Setup page in CentreWare Internet Services provides links to authentication,
authorization, and personalization configuration settings.
1.
In CentreWare Internet Services, click
Properties
>
Login/Permissions/Accounting
.
2.
Click
Login Methods
.
Setting Up Authentication for a Smart Card System
Configuring Domain Controller Settings
1.
On the Xerox
®
Access Setup page, under Action, next to Domain Controller(s), click
Edit
. The domain
controller server must validate the domain certificate on the smart card of the user before the user
can access the printer.
2.
Click
Add Domain Controller
.
3.
If you are using a windows-based domain controller, under Domain Controller Type, select
Windows
Based Domain Controller
.
4.
Type the domain controller server address information.
5.
Click
Save
to apply the new settings or
Cancel
to return to the previous screen.
6.
To change the search priority of the domain controller, click
Change Domain Priority
.
a.
To change the priority of the server, select a server in the list and click the arrows.
b.
Click
Close
.
7.
To configure NTP settings, under Action, next to NTP, click
Edit
. Synchronize the domain controller
time with the time set on the printer.
Note:
Xerox recommends that you enable NTP to ensure time synchronization.
8.
To return to the Xerox
®
Access Setup page, click
Close
.
Summary of Contents for ColorQube 8700
