manualshive.com logo in svg

Xerox Color C75 Press, User Manual

Share
Download
Xerox Color C75 Press User Manual Download Page 93

8

Machine Status

Machine Status

Press the Machine Status button on the UI control panel to access the Machine Status
information and features.

The Machine Status button is used to access machine status information and features:

• Machine information
• Faults
• Supplies
• Billing information
• Tools

Machine Information tab

Machine Information provides general information about the copier/printer and has
buttons that allow the user to view details that apply to the machine and to access other
machine information features.

Paper Tray Status

Select the Paper Tray Status button to view the current status information for each
paper tray.

8-1

Xerox

®

 Color C75 Press

User Guide

Summary of Contents for Color C75 Press





















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands