manualshive.com logo in svg

Xerox Color C75 Press, User Manual

Share
Download
Xerox Color C75 Press User Manual Download Page 212

Manual decurler buttons

The Interface Module manual decurler mode has seven levels of curl correction that are
available at the Interface Module Control Panel: three levels of Up-curl correction and
three levels of Down-curl correction, and no correction level.

The amount of curl correction is changed by selecting a related button. The current
selected amount of curl correction is displayed by the Control Panel LEDs.

Problem solving

Clearing jams

Tip

Always ensure that all paper jams, including any small ripped pieces of paper, are cleared
before proceeding with your print jobs.

Note

Remedies differ according to the paper jam location. Follow the instructions displayed
to remove the jammed paper.

Paper jams at lever 1a

1. Open the front cover of the Interface Module.

Xerox

®

 Color C75 Press

15-4

User Guide

Interface Module

Summary of Contents for Color C75 Press





















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands