manualshive.com logo in svg

Xerox Color C75 Press, User Manual

Share
Download
Xerox Color C75 Press User Manual Download Page 245

049-907

Cause:  The HCS detects paper at the HCS top tray, HCS bypass, or at the HCS stacker
tray. However, no paper is present; HCS sensor fault

Remedy:  Perform the following:

Power Off/On the machine

If the problem still exists, contact the Customer Support Center.
• Carefully remove all sheets and paper scraps from jam clearance areas.

049-908

Cause:  The HCS detects paper at the HCS top tray, HCS bypass, or at the HCS stacker
tray. However, no paper is present; HCS sensor fault

Remedy:  Perform the following:

Power Off/On the machine

If the problem still exists, contact the Customer Support Center.
• Carefully remove all sheets and paper scraps from jam clearance areas.

049-940

Cause:  HCS front door fault

Remedy:  Perform the following:

Power Off/On the machine

If the problem still exists, contact the Customer Support Center.

049-941

Cause:  Stacker Cart fault

Remedy:  Perform the following:

Power Off/On the machine

If the problem still exists, contact the Customer Support Center.

049-945

Cause:  HCS detects Top Tray as always full

Remedy:  Perform the following:

Power Off/On the machine

If the problem still exists, contact the Customer Support Center.
• Carefully remove all sheets and paper scraps from jam clearance areas.

049-960

Cause:  HCS sensor failure

Remedy:  Perform the following:

16-23

Xerox

®

 Color C75 Press

User Guide

High Capacity Stacker (HCS)

Summary of Contents for Color C75 Press





















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands