manualshive.com logo in svg

Xerox Color C75 Press, User Manual

Share
Download
Xerox Color C75 Press User Manual Download Page 173

078-272

Cause:  (Optional) Paper Tray 6 malfunctioned.

Remedy:  Check the paper loaded in Tray 6. Power off and then power on the machine.
If the tray errors are not fixed by performing the relevant remedy, contact the Customer
Support Center.

078-273

Cause:  (Optional) Paper Tray 6 malfunctioned.

Remedy:  Check the paper loaded in Tray 6. Power off and then power on the machine.
If the tray errors are not fixed by performing the relevant remedy, contact the Customer
Support Center.

078-274

Cause:  (Optional) Paper Tray 6 malfunctioned.

Remedy:  Check the paper loaded in Tray 6. Power off and then power on the machine.
If the tray errors are not fixed by performing the relevant remedy, contact the Customer
Support Center.

078-275

Cause:  (Optional) Paper Tray 6 malfunctioned.

Remedy:  Check the paper loaded in Tray 6. Power off and then power on the machine.
If the tray errors are not fixed by performing the relevant remedy, contact the Customer
Support Center.

078-276

Cause:  (Optional) Paper Tray 6 malfunctioned.

Remedy:  Check the paper loaded in Tray 6. Power off and then power on the machine.
If the tray errors are not fixed by performing the relevant remedy, contact the Customer
Support Center.

078-277

Cause:  (Optional) Paper Tray 6 malfunctioned.

Remedy:  Check the paper loaded in Tray 6. Power off and then power on the machine.
If the tray errors are not fixed by performing the relevant remedy, contact the Customer
Support Center.

078-278

Cause:  (Optional) Paper Tray 6 malfunctioned.

Remedy:  Check the paper loaded in Tray 6. Power off and then power on the machine.
If the tray errors are not fixed by performing the relevant remedy, contact the Customer
Support Center.

078-279

Cause:  (Optional) Paper Tray 6 malfunctioned.

12-9

Xerox

®

 Color C75 Press

User Guide

High Capacity Feeder (1-tray HCF/Tray 6)

Summary of Contents for Color C75 Press





















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands