manualshive.com logo in svg

Xerox Color C75 Press, User Manual

Share
Download
Xerox Color C75 Press User Manual Download Page 203

2.

Power Off/On the machine.

3.

If problems persist, contact the Customer Support Center.

Note

Trays other than the OHCF trays may be used in the interim.

078-942

Cause:  An OHCF tray has malfunctioned.

Remedy:  Perform the following:

1.

Check the paper loaded in the trays.

2.

Power Off/On the machine.

3.

If problems persist, contact the Customer Support Center.

Note

Trays other than the OHCF trays may be used in the interim.

078-943

Cause:  An OHCF tray has malfunctioned.

Remedy:  Perform the following:

1.

Check the paper loaded in the trays.

2.

Power Off/On the machine.

3.

If problems persist, contact the Customer Support Center.

Note

Trays other than the OHCF trays may be used in the interim.

OHCF (Trays 6/7) specifications

Oversized High Capacity Feeder (OHCF/Trays 6 and 7)

Specification

Item

SEF: 8.5 x 11 in./A4, 8.5 x 13 in., 8.5 x 14 in., 10 x 14 in./B4, 11 x 17 in./A3,
12 x 18 in., 12.6 x17.7 in./SRA3, 13 x 18 in., 13 x 19 in., 12.6 x 19.2 in., B5
LEF: B5, 7.25 x 10.5 in. (executive), A4, 8.5 x 11 in., 8.0 x 10 in.
Custom sizes: 182-330 mm (7.2-13 in.) width and 182-488 mm (7.2-19.2
in.) length

Sheet size

18 lb. bond to 110 lb. cover/64-300 gsm

Paper weight

2000 sheets/drawer

Important

When using up to Xerox 24 lb./90 gsm paper.

Paper capacity

13-27

Xerox

®

 Color C75 Press

User Guide

Oversized High Capacity Feeder (OHCF), 1 or 2 trays (Trays 6/7)

Summary of Contents for Color C75 Press





















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands