manualshive.com logo in svg

Xerox Color C75 Press, User Manual

Share
Download
Xerox Color C75 Press User Manual Download Page 306

The booklet is assembled and stapled in the booklet area of the finisher; therefore, the
booklet enters the SquareFold Trimmer Module already assembled. Any adjustments to
the image of the original and its placement on the booklet page must be done from the
machine UI, your print driver, or from the print server.

Note

Always refer to the SquareFold Trimmer Module Hints and Tips section before using the
SquareFold Trimmer Module. The hints and tips section provides valuable information
about setting up your jobs, which in turn ensures the best possible output for your
print/copy jobs.

You may want to run one or more test prints/copies before running larger jobs.

Identifying the components

Main components

The main components consist of:

1.

Top Left Cover: Open this cover to remove paper jams. The square fold mechanism
is found in this area.

2.

Top Right Cover: Open this cover to remove paper jams. The trimming mechanism
is found in this area.

3.

Booklet Output Tray: This tray receives square-fold booklet output from the finisher.

4.

Control Panel: The Control Panel consists of a mimic display, buttons, and various
indicator lights.

5.

Trimmer Waste Container: Collects scrap/waste from the trimmer. Pull open to
remove and dispose of trimmer waste scraps.

Xerox

®

 Color C75 Press

18-2

User Guide

SquareFold Trimmer Module

Summary of Contents for Color C75 Press





















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands