manualshive.com logo in svg

Xerox Color C75 Press, User Manual

Share
Download
Xerox Color C75 Press User Manual Download Page 216

3. Return the lever  2b to the original position.

4. Close the front cover of the Interface Module.

5. Follow the instructions on the UI to clear other areas or to resume your print job.

Fault codes

The fault code table lists problems and suggested solutions that apply to the Interface
Module. If the problem persists after following all instructions, call your Xerox Customer
Support Center.

048-100

Cause:  Paper jam:

A jam notification is displayed on the UI.
• A jam occurred during feeding.

Remedy:  Perform the following:

Carefully remove all sheets and paper scraps from the jam clearance areas.

Close the front door. Verify the paper used is within the approved paper specifications.
• Open the Interface Module front door.

Xerox

®

 Color C75 Press

15-8

User Guide

Interface Module

Summary of Contents for Color C75 Press





















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands