manualshive.com logo in svg

Xerox Color C75 Press, User Manual

Share
Download
Xerox Color C75 Press User Manual Download Page 2

©

2012 Xerox Corporation. All rights reserved. Xerox

®

 and Xerox and Design

®

 are

trademarks of Xerox Corporation in the United States and/or other countries.

FreeFlow

®

, SquareFold

®

, Xerox prInteract

™

, MeterAssistant

®

, SuppliesAssistant

®

,

CentreWare

®

, Scan to PC Desktop

®

, and Xerox Extensible Interface Platform

®

, are

trademarks of Xerox Corporation in the United States and/or other countries. Product
status, build status, and/or specifications are subject to change without notice.

Microsoft, Windows, Windows XP, Windows Vista, Internet Explorer, and Word are
registered trademarks of Microsoft Corporation in the United States and/or other
countries.

Adobe, the Adobe logo, Acrobat, the Acrobat logo, Acrobat Reader, Distiller, Adobe PDF
logo, Adobe PDF JobReady, Illustrator, InDesign, and Photoshop are registered trademarks
of Adobe Systems, Inc. PostScript is an Adobe registered trademark used with the Adobe
PostScript Interpreter, the Adobe page description language, and other Adobe products.
This product is not endorsed or sponsored by Adobe Systems, publisher of Adobe
Photoshop.

Fiery

®

 and PrintMe

®

 are registered trademarks of Electronics For Imaging, Inc. GBC

®

and AdvancedPunch

™

 are trademarks or registered trademarks of General Binding

Corporation.

BR4003

Summary of Contents for Color C75 Press





















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands