manualshive.com logo in svg

Xerox Color C75 Press, User Manual

Share
Download
Xerox Color C75 Press User Manual Download Page 283

Staple jams in the standard staple cartridge

Note

Always check inside the finisher for any individual staples or staple remnants.

1. Make sure that the machine has stopped printing.
2. Open the Right Cover on the finisher.

3. Grasp the Staple Cartridge handle located at  R1, and pull out the staple cartridge

from the finisher.

4. Check the inside of the finisher for any remaining staples, and if necessary, remove

them.

5. Open the staple cartridge unit as shown and remove the jammed staple.

Warning

To avoid injury to your fingers, carefully remove the jammed staples from the
cartridge.

17-35

Xerox

®

 Color C75 Press

User Guide

Standard/Booklet Maker Finisher

Summary of Contents for Color C75 Press





















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands