Xerox ApeosPort-II 5010 User Manual Download Page 485

Page: 485 / 619

Error Code

483

roblem Solv

027-585

O [Cause] SMB protocol error. Login disabled period.

[Remedy] Check with the system administrator for the login-

permitted period.

027-586

O [Cause] SMB protocol error. The password has expired.

[Remedy] Obtain a valid password from the system administrator.

027-587

O [Cause] SMB protocol error. The password must be changed.

[Remedy] Log in to Windows, and change the password. Ask the

system administrator for changing the setting so that you
do not need to change the login password next time.

027-588

O [Cause] SMB protocol error. The user is invalid.

[Remedy] Ask the system administrator for validating the user.

027-589

O [Cause] SMB protocol error. The user was locked out.

[Remedy] Ask the system administrator for canceling the lockout

status.

027-590

O [Cause] SMB protocol error. The user account has expired.

[Remedy] Obtain a valid user account from the system administrator.

Or, ask the system administrator to extend the account
expiration date.

027-591

O [Cause] SMB protocol error. Users are restricted. A blank

password is invalid.

[Remedy] Set the password for the user.

027-599

O [Cause] SMB protocol error

[Remedy] Try again. If the problem persists, contact our Customer

Support Center.

027-702

O O

[Cause] A certificate for addresses does not exist.
[Remedy] Register a certificate to the machine.

027-703

O O

[Cause] The certificate for addresses has expired.
[Remedy] Register a valid certificate to the machine.

027-704

O O

[Cause] The CA certificate for the specified Address Book does not

exist.

[Remedy] Check the path to the recipient’s certificate, and register

the required CA certificate to the machine.

027-705

[Cause] The certificate for addresses has been revoked.
[Remedy] Specify a valid certificate.

027-706

[Cause] Unable to find the S/MIME certificate associated with the

machine’s e-mail address when sending e-mail.

[Remedy] Import the S/MIME certificate corresponding to the mail

address to the machine.

027-707

[Cause] The S/MIME certificate associated with the machine’s e-

mail address has expired.

[Remedy] Import a new S/MIME certificate to the machine.

027-708

[Cause] The S/MIME certificate associated with the machine’s e-

mail address is not reliable.

[Remedy] Import a reliable S/MIME certificate to the machine.

Error Code

Category

Cause and Remedy

C P F S M O

* If the error persists after following the listed solution, contact our Customer Support Center. The contact number is

printed on the label or card attached on the machine.

Summary of Contents for ApeosPort-II 5010











































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ApeosPort-II 5010

Reviews:

Related manuals for ApeosPort-II 5010

Brands by name

Popular brands

Xerox ApeosPort-II 5010, User Manual

Search results

Summary of Contents for ApeosPort-II 5010

Reviews:

Related manuals for ApeosPort-II 5010

Brands by name

Popular brands