Xerox ApeosPort-II 5010 User Manual Download Page 478

Page: 478 / 619

15 Problem Solving

476

roblem Solv

024-742

[Cause] Booklet printing was specified for [Print Options], but the

number of print pages for the job exceeded the maximum
number for booklet creation.

[Remedy] Change the [Print Options] setting to split the pages

appropriately to create separate volumes, or to cancel the
booklet setting.

024-746

[Cause] The specified paper type is not compatible with the

specified paper size, paper tray, output tray, or 2-sided
printing.

[Remedy] Check the print data.

024-747

[Cause] Incompatible print parameters are used. The combination

of the specified features such as Document Size, Paper
Size, Paper Tray, 2 sided print, and Output Tray is
incompatible.

[Remedy] Check the print data, and try to print again.

024-748

[Cause] The number of digits specified in [Number of Digits] of the

[Page Number] screen does not match the value specified
in [Start Number] of the [Page Number - Print On] screen.

[Remedy] Set [Number of Digits] to [Auto Assign] or a value

appropriate for the value specified in [Start Number].

024-775

Refer to 024-742.

024-984

O O

[Cause] The staple cartridge for booklet is not correctly attached.
[Remedy] Replace the staple cartridge with a new one.

For information on how to replace the staple cartridge for booklet, refer to
"Replacing the Staple Cartridge for Booklet (When a C-Finisher with
Booklet Maker is Installed)" (P.415).

026-700

[Cause] By Address Book operation, the machine received an

unsupported protocol from the LDAP server.

[Remedy] Try again. If the problem persists, contact our Customer

Support Center.

026-701

[Cause] The number of queries to Address Book exceeded the

machine's processing capability.

[Remedy] Wait for a while and try again. If the number of queries to

Address Book is only one, the machine’s software may be
defective. Contact our Customer Support Center.

026-702

[Cause] The number of access from the LDAP server to the

machine exceeded the machine's processing capability.

[Remedy] Wait for a while and try again. If the problem persists,

contact our Customer Support Center.

027-452

O [Cause] The IP address already exists.

[Remedy] Change the IP address.

Refer to the Network Administrator Guide for details.

027-500

O O [Cause] Unable to resolve the SMTP server name when returning

e-mail.

[Remedy] Check on the CentreWare Internet Services if the SMTP

server settings are correct.

Error Code

Category

Cause and Remedy

C P F S M O

* If the error persists after following the listed solution, contact our Customer Support Center. The contact number is

printed on the label or card attached on the machine.

Summary of Contents for ApeosPort-II 5010











































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ApeosPort-II 5010

Reviews:

Brands by name

Popular brands

Xerox ApeosPort-II 5010, User Manual

Search results

Summary of Contents for ApeosPort-II 5010

Reviews:

Brands by name

Popular brands