Xerox ApeosPort-II 5010 User Manual Download Page 172

Page: 172 / 619

4 Fax

170

Fa
x

When Not Using a Receiver

Adjust the volume of the line monitor.
We recommend setting the volume of the line monitor to [Loud] so that it is easy to
hear the voice prompts.

For information on how to change the volume of the line monitor, refer to "Line Monitor Volume"
(P.270)

Select [On-hook (Manual Send/
Receive)] on the [Advanced
Features] screen.

Select [Manual Receive] from the
drop-down menu.

Specify the fax number of the facsimile information service.

The call destination can be specified using the numeric keypad address numbers, or
one touch buttons. The address book cannot be used.

The call destination can also be specified using the keyboard displayed on the
screen.

Note

•

When the line type is set to a pulse line, [Tone (:)] does not appear.

•

If you want to send tones (or to use the touch-tone services) while using a pulse line, select
[Tone (:)].

•

Some touch-tone services may not be available even if you set your telephone to send
tones.

When the machine connects to the service, you will hear voice prompts. Follow the
voice prompts to enter the required numbers.

When input is finished, press the <Start> button.

Summary of Contents for ApeosPort-II 5010











































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ApeosPort-II 5010

Reviews:

Brands by name

Popular brands

Xerox ApeosPort-II 5010, User Manual

Search results

Summary of Contents for ApeosPort-II 5010

Reviews:

Brands by name

Popular brands