Xerox ApeosPort-II 5010 User Manual Download Page 596

Page: 596 / 619

16 Appendix

594

Appe

nd
ix

To print an activity report to check the transmission results

Machine Status

[Billing Meter/Print Report]

[Print Report/List]

[Job Status/Activity Report]

[Activity Report]

* When [Activity Report] is being displayed on the [All Services] screen:
[Activity Report]

[Activity Report]

For more information, refer to "Job Status/Activity Report" (P.374).

To have activity reports not printed automatically

Enter the user ID

[System Settings]

[Common Settings]

[Reports]

[Activity Report]

[Auto Print Off]

For more information, refer to "Activity Report" (P.277).

To change the output destination for incoming faxes

Enter the user ID

[System Settings]

[Fax Mode Settings]

[File Destination/Output Destination]

[Output Destination-Line Setup]

For more information, refer to "Output Destination - Line Setup" (P.312).

To change the output paper for incoming faxes

Enter the user ID

[System Settings]

[Fax Mode Settings]

[Fax Control]

[Receiving Paper Size]

For more information, refer to "Receiving Paper Size" (P.310).

To change the volume of the audio tone produced upon fax reception

Enter the user ID

[System Settings]

[Common Settings]

[Audio Tones]

[Ringing Volume]

For more information, refer to "Ringing Volume" (P.270).

To allow different sizes of original to be loaded by default

Enter the user ID

[System Settings]

[Fax Mode Settings]

[Fax Defaults]

[Mixed Sized Originals]

[On]

For more information, refer to "Mixed Sized Originals" (P.307).

Scan Settings

To register an e-mail/forwarding PC address

Enter the user ID

[System Settings]

[Setup Menu]

[Address Book]

* When [Setup Menu] is being displayed on the [All Services] screen: [Setup Menu]

[Address Book]

For more information, refer to "Address Book" (P.328).

To print an address numbers list

Machine Status

[Billing Meter/Print Report]

[Print Report/List]

[Scan Mode Settings]

[Address Book]

For more information, refer to "Address Book" (P.377).

To constantly allow mixed sized originals to be loaded

Enter the user ID

[System Settings]

[Scan Mode Settings]

[Scan Defaults]

[Mixed Sized Originals]

[On]

For more information, refer to "Mixed Sized Originals" (P.303).

Summary of Contents for ApeosPort-II 5010











































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ApeosPort-II 5010

Reviews:

Brands by name

Popular brands

Xerox ApeosPort-II 5010, User Manual

Search results

Summary of Contents for ApeosPort-II 5010

Reviews:

Brands by name

Popular brands