manualshive.com logo in svg

Xerox ApeosPort-II 5010, User Manual

Share
Download
Xerox ApeosPort-II 5010 User Manual Download Page 506

15 Problem Solving

504

P

roblem Solv

in

g

15

116-790

O

[Cause] 1. If the operator cancelled printing a document that was 

received using the Fax to Mailbox or iFax to Mailbox 
feature:
The first set of the document is not stapled. 

2. For a cause other than Cause 1: 

All the sets of the document are not stapled.

[Remedy] For Cause 1. Manually staple the first set of the document. 

Or, do not cancel printing a document that is received 
using the Fax to Mailbox or iFax to Mailbox feature.
For Cause 2. Check if the staple position has been 
correctly specified, and try printing again.

123-400

O

[Cause] Machine malfunction
[Remedy] Turn the machine off and on. If the problem persists, 

contact our Customer Support Center.

124-701

O [Cause] The output destination was changed to the center tray due 

to the malfunction of the specified Side Tray.

[Remedy] Contact our Customer Support Center. Any trays other 

than the defective output tray can be used.

124-702

O [Cause] The output destination was changed to the center tray due 

to the malfunction of the specified Finisher tray.

[Remedy] Contact our Customer Support Center. Any trays other 

than the defective output tray can be used.

124-704

O [Cause] The output destination was changed to the center tray due 

to the malfunction of the specified output tray.

[Remedy] Contact our Customer Support Center. Any trays other 

than the defective output tray can be used.

124-705

O

[Cause] The punch setting was cancelled.
[Remedy] Check the punch position, and try again.

124-709

O

[Cause] The document exceeded the maximum number of pages 

that can be stapled.

[Remedy] Reduce the number of pages, or cancel the stapling 

setting, then try to print again.

133-210
133-211
133-212
133-213
133-214
133-215
133-216
133-217
133-218
133-219
133-220
133-221
133-222
133-223
133-224

O

[Cause] An error occurred during fax transmission.
[Remedy] Turn the machine off and on. If the machine conditions are 

not improved by performing the relevant remedy, contact 
our Customer Support Center.

Error Code

Category

Cause and Remedy

C P F S M O

* If the error persists after following the listed solution, contact our Customer Support Center.  The contact number is 

printed on the label or card attached on the machine.

Summary of Contents for ApeosPort-II 5010












































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands