Xerox 770 User Manual Download Page 80 | Manualshive

Page: 80 / 268

Xerox 770 User Manual Download Page 80

Current System Software

The version of the system software that is currently installed on the machine is displayed
under the Current System Software title.

Machine Configuration

Select the Machine Configuration button to displays a list of the various hardware
components and options that are available on the machine. The list also displays the
status of each of these components and options. Hardware components and options
include the document feeder, paper trays, and any optional feeding and finishing
devices attached to the machine.

Software Version

Select the Software Version button to display a list of the software versions for the
various machine components, such as the print engine, the Controller ROM (Read Only
Memory), and any optional feeding and finishing devices.

Paper Tray Status

Select the Paper Tray Status button to view the current status information for each
paper tray.

Print Reports

The Print Reports button must be enabled by the system administrator before reports
can be printed. Some features on the Print Reports screen is only available in the system
administrator mode.

To print a report, select the various report button to identify the desired report criteria
and then press Start.

Note

The type of reports available vary depending on machine configuration.

Overwrite Hard Disk

The Overwrite Hard Disk feature prevents the document image and registered data
that is recorded on the machine hard disk from being illegally retrieved. The number
of overwrites is set by the system administrator.

Overwriting the machine hard disk is performed after every copy job that includes more
than one set, and after each scan job is transferred to the print server. The Standby
status indicates the completion of the overwriting process.

Faults tab

The Faults tab provides access to fault information and error messages. Access to this
tab is by pressing the Machine Status button on the control panel and selecting the
Fault tab on the UI.

Xerox

®

770 Digital Color Press

8-2

User Guide

Machine Status

«
...
78
79
80
81
82
...
»

Summary of Contents for 770













































































































































































































































































Reviews:

No comments