manualshive.com logo in svg

Xerox 770, User Manual, Page: 133 / 268

Share
Download
Xerox 770 User Manual Download Page 133

078-214

Paper Tray 5 (Bypass) malfunctioned.

Power-cycle the machine. If the tray errors are not fixed by performing the relevant
remedy, contact the Customer Support Center.

078-282

Paper Tray 5 (Bypass) malfunctioned.

Power-cycle the machine. If the tray errors are not fixed by performing the relevant
remedy, contact the Customer Support Center.

078-283

Paper Tray 5 (Bypass) malfunctioned.

Power-cycle the machine. If the tray errors are not fixed by performing the relevant
remedy, contact the Customer Support Center.

078-281

Check the paper loaded in Tray 5 and then power off/on the printer.

078-282

Power off/on the printer.

091-311

Charge Corotron cleaner failure.

Power-cycle the machine. If the error is not fixed by performing the relevant remedy,
contact the Customer Support Center.

091-320

Charge Corotron fault.

Power off/on the machine.

116-210

An error occurred with the media reader.

Power-cycle the machine. If the machine is not improved by performing the relevant
remedy, contact your Xerox Customer Support Center.

116-701

2 sided print could not be made due to insufficient memory.

Print each side.

116-704

A media is not inserted correctly.

Insert the media correctly.

10-25

Xerox

®

 770 Digital Color Press

User Guide

Problem solving

Summary of Contents for 770













































































































































































































































































Reviews:

No comments