manualshive.com logo in svg

Xerox 770, User Manual, Page: 155 / 268

Share
Download
Xerox 770 User Manual Download Page 155

078-273

Cause:  (Optional) Paper Tray 6 malfunctioned.

Remedy:  Check the paper loaded in Tray 6. Power off and then power on the machine.
If the tray errors are not fixed by performing the relevant remedy, contact the Customer
Support Center.

078-274

Cause:  (Optional) Paper Tray 6 malfunctioned.

Remedy:  Check the paper loaded in Tray 6. Power off and then power on the machine.
If the tray errors are not fixed by performing the relevant remedy, contact the Customer
Support Center.

078-275

Cause:  (Optional) Paper Tray 6 malfunctioned.

Remedy:  Check the paper loaded in Tray 6. Power off and then power on the machine.
If the tray errors are not fixed by performing the relevant remedy, contact the Customer
Support Center.

078-276

Cause:  (Optional) Paper Tray 6 malfunctioned.

Remedy:  Check the paper loaded in Tray 6. Power off and then power on the machine.
If the tray errors are not fixed by performing the relevant remedy, contact the Customer
Support Center.

078-277

Cause:  (Optional) Paper Tray 6 malfunctioned.

Remedy:  Check the paper loaded in Tray 6. Power off and then power on the machine.
If the tray errors are not fixed by performing the relevant remedy, contact the Customer
Support Center.

078-278

Cause:  (Optional) Paper Tray 6 malfunctioned.

Remedy:  Check the paper loaded in Tray 6. Power off and then power on the machine.
If the tray errors are not fixed by performing the relevant remedy, contact the Customer
Support Center.

078-279

Cause:  (Optional) Paper Tray 6 malfunctioned.

Remedy:  Check the paper loaded in Tray 6. Power off and then power on the machine.
If the tray errors are not fixed by performing the relevant remedy, contact the Customer
Support Center.

078-280

Cause:  (Optional) Paper Tray 6 malfunctioned.

Remedy:  Check the paper loaded in Tray 6. Power off and then power on the machine.
If the tray errors are not fixed by performing the relevant remedy, contact the Customer
Support Center.

12-9

Xerox

®

 770 Digital Color Press

User Guide

High Capacity Feeder (1-tray HCF/Tray 6)

Summary of Contents for 770













































































































































































































































































Reviews:

No comments