Xerox 770 User Manual Download Page 212

Page: 212 / 268

Finisher problem solving

Tip

Always ensure that all paper jams, including any small ripped pieces of paper, are cleared
before proceeding with your print jobs.

Note

Remedies differ according to the paper jam location. Follow the instructions displayed
to remove the jammed paper.

Paper jams in Tray 8 (Post-Process Inserter)

1. Press the Cover button.

2. Open cover 1e and then remove the jammed paper and all paper loaded in the tray.

Note

If paper is torn, check inside the machine and remove it.

3. Fan the paper you removed, making sure that all four corners are neatly aligned, and

then load them again.

Xerox

770 Digital Color Press

16-14

User Guide

Standard/Booklet Maker Finisher

Summary of Contents for 770













































































































































































































































































Search results

Summary of Contents for 770

Reviews:

Xerox 770, User Manual, Page: 212 / 268

Search results

Summary of Contents for 770

Reviews: