manualshive.com logo in svg

Xerox 770, User Manual, Page: 129 / 268

Share
Download
Xerox 770 User Manual Download Page 129

027-703

A media reader is not connected with the machine correctly.

Check the connection between the media reader and the machine.

027-720

Unable to find the server of an application interface destination.

Check DNS server address. Or check whether an application interface (CentreWare
Flow Service) installed on the computer is registered by DNS server or not.

027-721

An application interface destination does not exist.

Check whether an application linked (CentreWare Flow Service) operates correctly.

027-722

The jobs was timed out during connection with an application interface destination.

Try to process the job flow again.

027-723

Authentication at the application interface destination (CentreWare Flow Service) fails.

Check a user name and password that is used when creating a job flow.

027-737

An error occurred while reading data from the job template pool server.

Check to see whether you have privileges for the directory storing the job template.

027-739

Unable to find the specified job template server.

Check the path name for the job template server.

027-740

Unable to login to job template server.

Check the login user name and password.

027-741

Unable to connect to job template server.

Have the network administrator check the network and server environments.

027-742

Unable to store job template due to insufficient hard disk space.

Remove unnecessary data from the hard disk to increase free disk space.

027-743

The specified job template server is incorrect.

Check the settings for the job template server.

10-21

Xerox

®

 770 Digital Color Press

User Guide

Problem solving

Summary of Contents for 770













































































































































































































































































Reviews:

No comments