Xerox 770, User Manual, Page: 124 / 268

016-227
An error occurred in the document scanner.
Power-cycle the machine. If the machine is not improved by performing the relevant
remedy, Contact your Xerox Customer Support Center.
016-228
An error occurred in the document scanner.
Power-cycle the machine. If the machine is not improved by performing the relevant
remedy, Contact your Xerox Customer Support Center.
016-454
Unable to retrieve IP address from DNS.
Check the DNS configurations and IP address retrieve method.
016-708
Annotation is not possible due to insufficient hard disk space.
Remove unnecessary data from the hard disk to increase free disk space.
016-710
Delayed print documents cannot be registered.
Check print options and specify the print data again. If the hard disk is malfunctioning,
contact your Xerox Customer Support Center.
016-712
Refer to 003-751.
016-721
An error occurred during print processing. Probable causes are as follows:
• Printing was instructed by [automatic tray selection] when [Paper Type Priority] is
set to [Automatic Tray switching Off] for all paper in the [Common Service Settings].
• ESC/P command error
• When printing by automatic tray selection, set one of the paper types to a setting
other than [Automatic Tray switching Off] in [Paper Type Priority].
• Check print data.
016-735
Attempted to print [Job Template List] while updating the job template.
Retry printing after waiting for a period.
016-738
Booklet Creation is not applied to the specified paper.
Specify the printable paper size for booklet creation.
Xerox
®
770 Digital Color Press
10-16
User Guide
Problem solving