manualshive.com logo in svg

Xerox 770, User Manual, Page: 241 / 268

Share
Download
Xerox 770 User Manual Download Page 241

17

SquareFold Trimmer
Module

Overview

The SquareFold Trimmer Module is an optional finishing device that is used in conjunction
with another optional finishing device that contains a booklet maker.

Note

The SquareFold Trimmer Module requires a finisher with a booklet maker attached.

The SquareFold Trimmer Module:

• Receives the booklet from the booklet maker area of the finisher

• Flattens the booklet spine, thereby reducing the booklet’s thickness and giving it the

appearance of a perfect-bound book

• Trims/cuts away the face (edge) of the booklet, resulting in a neat finished edge

The booklet is assembled and stapled in the booklet area of the finisher; therefore, the
booklet enters the SquareFold Trimmer Module already assembled. Any adjustments to
the image of the original and its placement on the booklet page must be done from the
machine UI, your print driver, or from the print server.

17-1

Xerox

®

 770 Digital Color Press

User Guide

Summary of Contents for 770













































































































































































































































































Reviews:

No comments