Xerox 4150 - WorkCentre B/W Laser, Service Manual

Page: 463 / 631

January 2016
WorkCentre 4150/4250/4260/4265WorkCentre 4150/4250/4260WorkCentre
PL 10.26
Parts List
PL 10.26 Fuser (2 of 2) (4150)
Item Part Description
1 – Fuser cover (P/O PL 10.25 Item 1 )
2 – Roll (P/O PL 10.25 Item 1 )
3 – Pin (P/O PL 10.25 Item 1 )
4 030N00720 Gear and bracket assembly
5 – Gear (P/O PL 10.26 Item 4 )
6 – Bracket (P/O PL 10.26 Item 4 )
7 115N00862 Carbon brush assembly ( REP 10.5 )
8 – Carbon brush (P/O PL 10.26 Item
7 )
9 – Spring (P/O PL 10.26 Item 7 )
10 – Lower brush cover (P/O PL 10.25
Item 1 )
11 – Upper brush cover (P/O PL 10.25
Item 1 )
12 022N02233 Heat roller assembly (See Note 1
and Note 2) (
REP 10.5 )
13 – Heat roller (P/O PL 10.26 Item 12 )
14 – Heat roller collar (P/O PL 10.26
Item 12 )
15 013N13866 Bearing ( REP 10.5 )
16 016N00295 Heat roller collar (See Note 2)
17 – Spring (P/O PL 10.25 Item 1 )
18 – Jam lever LH (P/O PL 10.25 Item 1 )
19 – Bracket (P/O PL 10.25 Item 1 )
20 – Bracket (P/O PL 10.25 Item 1 )
21 – Jam lever RH (P/O PL 10.25 Item
1 )
22 013N13847 Bearing ( REP 10.5 )
23 022N02273 Pressure roller (See Note 1)
24 – E-clip (Not Spared)
25 006N01330 Cleaning shaft ( REP 10.5 )
26 – Input guide (P/O PL 10.25 Item 1 )
27 – Pressure bearing (P/O PL 10.25
Item 1 )
28 – Spring (P/O PL 10.25 Item 1 )
29 – Fuser cover (P/O PL 10.25 Item 1 )
30 – Ground strip cover (P/O PL 10.25
Item 1 )
31 – Ground strip (P/O PL 10.25 Item 1 )
32 – Ground strip (P/O PL 10.25 Item 1 )
33 – Cleaning felt (P/O PL 10.25 Item 1 )
NOTE: 1. HFSI. To reset the HFSI count, go to GP 16. 2. If a
new heat roller assembly is installed, also install a new heat
roller collar, PL 10.26 Item 16.