Xerox 4150 - WorkCentre B/W Laser, Service Manual

Page: 524 / 631

January 2016
6-39 WorkCentre 4150/4250/4260WorkCentre 4150/4250/4260WorkCentre Work-
GP 13
General Procedures and Information
GP 13 Installation Space Requirements
Purpose
To outline the general space requirements to enable safe use and adequate access for service.
WARNING
Do not work in a confined space. 1 m (39 inches) space is needed for safe working.
WARNING
USA and Canada. Do not install this machine in a hallway or exit route that does not
have 1.12 m (44 inches) of space additional to the normal space requirements in front of
the machine. To conform with fire regulations this additional 1.12 m (44 inches) of space
is needed in front of the machine in hallway and exit routes.
Procedure
Refer to the following:
• Machine Height (4150)
• Machine Height (4250/4260)
• Machine Height (4265)
• Machine Weight (4265)
• Machine Dimensions and Installation Space Requirements
Machine Height (4150)
Basic Machine
• Machine with the DADF lowered = 615mm (24.2 inches)
• Machine with the DADF raised = 820mm (32.2 inches)
Machine with Two Trays and Tall Stand
• Machine with the DADF lowered = 1085mm (42.7 inches)
• Machine with the DADF raised = 1295mm (51 inches)
Machine with Four Trays and Low Stand
• Machine with the DADF lowered = 1105mm (43.5 inches)
• Machine with the DADF raised = 1315 mm (51.7 inches)
Machine Height (4250/4260)
Basic Machine
• Machine with the DADF lowered = 641mm (25.2 inches)
• Machine with the DADF raised = 835mm (32.8 inches)
Machine with Two Trays and Tall Stand
• Machine with the DADF lowered = 1111mm (43.7 inches)
• Machine with the DADF raised = 1310mm (51.5 inches)
Machine with Four Trays and Low Stand
• Machine with the DADF lowered = 1130mm (44.5 inches)
• Machine with the DADF raised = 1330 mm (52.3 inches)
Machine with HCF
• Machine with the DADF lowered = 1166mm (45.9 inches)
• Machine with the DADF raised = 1385 mm (54.5 inches)
Machine Height (4265)
Basic Machine
• Machine with the DADF lowered = 622.3 mm (24.5 inches)
• Machine with the DADF raised = 812.8 mm (32.0 inches)
Machine with Two Trays and HCF
• Machine with the DADF lowered = 1149.35 mm (45.25 inches)
• Machine with the DADF raised = 1481 mm (58.3 inches)
Machine Weight (4265)
NOTE: For a description of the three 4265 machine configurations, go to Table 19 , 4265 Gen-
eral Specifications.
• S configuration = 42.41 Kg (93.63 lb.)
• X Configuration = 42.53 kg (93.89 lb.)
• XF Configuration = 92.39 kg (203.9 lb.)
• Each 500 sheet tray = 11.88 Kg (26.19 lb.)
• Finisher = 10.4Kg (23.02 lb.)
• High Capacity Feeder = 27.58 Kg (57.2lb)