January 2016
2-71
WorkCentre WorkCentre 4150/4250/4260WorkCentre 4150/4250/42604150/
09-800, 810
Status Indicator RAPs
09-800, 810 Invalid Toner Cartridge RAP
09-800 The machine has detected an incompatible toner cartridge.
09-810 The machine has detected a non Xerox toner cartridge.
Procedure
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
Go to the relevant procedure:
•
4150 Checkout
•
4250/4260 Checkout
•
4265 Checkout
4150 Checkout
NOTE: The main PWB has test points. The location of the test points is shown on the
Main
PWB
PJ location illustration.
Refer to
Wiring Diagram 5
. Perform the following:
1.
Ensure that the toner cartridge,
PL 9.10 Item 2
is the correct toner cartridge for the
machine.
2.
Check the wiring between the CRUM PWB,
PL 4.15 Item 15
and CN11 on the
Main PWB
.
3.
Install new components as necessary:
•
Toner cartridge,
PL 9.10 Item 2
.
•
CRUM PWB,
PL 4.15 Item 15
.
4.
Perform the
OF5
Main PWB Check RAP.
4250/4260 Checkout
NOTE: The main PWB has test points. The location of the test points is shown on the
Main
PWB
PJ location illustration.
Refer to
Wiring Diagram 23
. Perform the following:
1.
Ensure that the toner cartridge,
PL 9.10 Item 2
is the correct toner cartridge for the
machine.
2.
Check the wiring between the toner cartridge CRUM connector,
PL 4.15 Item 33
and
CN11 on the
Main PWB
.
3.
Install new components as necessary:
•
Toner cartridge,
PL 9.10 Item 2
.
•
Toner cartridge CRUM connector,
PL 4.15 Item 33
.
4.
Perform the
OF5
Main PWB Check RAP.
4265 Checkout
NOTE: The main PWB has test points. The location of the test points is shown on the
Main
PWB
PJ location illustration.
Refer to
Wiring Diagram 39
. Perform the following:
1.
Ensure that the toner cartridge,
PL 9.10 Item 2
is the correct toner cartridge for the
machine.
2.
Check the wiring between the toner cartridge CRUM connector,
PL 4.15 Item 33
and
CN22 on the
Main PWB
.
3.
Install new components as necessary:
•
Toner cartridge,
PL 9.10 Item 2
.
•
Toner cartridge CRUM connector,
PL 4.15 Item 33
.
4.
Perform the
OF5
Main PWB Check RAP.
Summary of Contents for 4150 - WorkCentre B/W Laser
