Xerox 4150 - WorkCentre B/W Laser, User Manual, Page: 197 / 201

12 Troubleshooting
Xerox WorkCentre 4150 User Guide 175
Finisher Fault Finisher component not
functioning correctly. Open finisher door and check the
finisher. Close finisher door.
If the fault persists, Power Off /
Power On.
If the problem persists, call for
service.
Stapler Fault Stapler unit does not work. Open finisher door and check the
stapler. Close finisher door.
If the fault persists, Power Off /
Power On.
If the problem persists, call for
service.
Stacker Fault Stacker unit does not work. Open finisher door and check the
finisher. Close finisher door.
If the fault persists, Power Off /
Power On.
If the problem persists, call for
service.
DADF DADF Jam The loaded document has
jammed in the DADF. Open DADF cover and remove
jammed media.
Load Document You have attempted to set up
a job with document not
loaded or incorrectly loaded
in the DADF. Load document in DADF.
If already loaded, remove and
reload.
Errors & Faults Description Solution