8 Paper and other Media
Xerox WorkCentre 4150 User Guide
101
Using the Bypass Tray
The bypass tray
is located on the right side of your machine. It can be closed
when not in use, making the product more compact. Use the bypass tray to
print transparencies, labels, envelopes or postcards in addition to making
quick runs of paper types or sizes that are not currently loaded in the paper
tray. Acceptable print media is plain paper with sizes ranging from B5 - SEF
to 11" x 14" (176 mm x 250 mm to 279 mm x356 mm) and weighing between
16 lb and 24 lb (60 g/m
2
and 90 g/m
2
).
Loading the Bypass Tray
1.
Lower the bypass tray, located on the right side of the product and unfold
the paper support extension.
Remove any curl
on postcards, envelopes
and labels before
loading them into the
Bypass Tray.
2.
Prepare a stack of paper or envelopes for loading by flexing or fanning
them back and forth. Straighten the edges on a level surface.
3.
Load the print material with the
print side facing down and
against the right edge of the
tray.
NOTE:
Hold transparencies by the
edges and avoid touching the print
side.
4.
Adjust the paper guide to the
width of the stack of print
material. Ensure you have not
loaded too much print media.
The stack should be under the
Max. Fill Line.
Bypass Tray
Paper Guide
Max Fill Line
Summary of Contents for 4150 - WorkCentre B/W Laser
