9 Setups
Xerox WorkCentre 4150 User Guide
119
Receive Header
Select
Enable
to have a time stamp, page number and number of the sending
fax machine printed at the top of all received fax jobs.
Fax Receive Tray
Select from either Tray 1, Tray 2 or the Bypass Tray to use for incoming fax
transmissions.
Default Output
Options
Depending on the output device fitted, you will be able to staple or duplex your
incoming faxes. This utility is used to enable the output options you require for
all your incoming faxes.
To select the output you require, select the
Stapled
button or the
Duplex
button, then select the
On
button. Both options can be on if required.
The Stapling option will put a single staple in the top left corner of faxes. If the
fax job has 1 sheet or more than 50 sheets, the fax job will not staple. The
Duplex option will assume Head-to-Head orientation (like a book).
E-mail / Fax
forward
This feature allows incoming or outgoing faxes to be automatically forwarded
to another recipient, either fax or e-mail.
Forward to E-mail
Select either
Forward All Faxes
,
Forward Transmitted Faxes
or
Forward
Received Faxes
.
Select either
Output Format pdf
or
Output Format TIFF
.
Enter forwarding E-mail address and
Save
settings.
Forward to Fax
Select either
Forward All Faxes
,
Forward Transmitted Faxes
or
Forward
Received Faxes
.
Enter forwarding fax number and
Save
settings.
Secure Receive
For added security, this feature enables the machine administrator to control
when and how your incoming faxes are printed.
To print a fax on receipt, the
Secure Receive
feature must be
Off
. Select the
On
button to hold the incoming fax until a passcode is used.
Print on
Passcode
settings can be changed using the number keypad. Touch
Save
to
confirm changes.
When a fax is received, the screen will prompt you to insert a four digit
passcode number (the default setting is
1111
). This number will then be used
by the user to release incoming faxes from the print queue.
Junk Fax
Prevention
This tool enables the machine administrator to prevent the receipt of unwanted
(junk) faxes. This is done by only allowing the receipt of faxes from numbers
held in the dial directory.
Summary of Contents for 4150 - WorkCentre B/W Laser
