![background image](http://html2.mh-extra.com/html/xerox/4150-workcentre-b-w-laser/4150-workcentre-b-w-laser_user-manual_3396400012.webp)
1 Welcome
8
Xerox WorkCentre 4150 User Guide
•
Do not allow anything to rest on the power cord. Do not locate the product
where persons will step or trip on the cord.
•
Use of an extension cord with this product is not recommended or
authorized. Users should check building codes and insurance
requirements if a properly earthed extension cord is to be used. Ensure that
the total ampere ratings of the products plugged into the extension cord do
not exceed the extension cord ampere rating. Also, ensure that the total
amperage of all products plugged into the wall outlets does not exceed the
outlet rating.
•
Disconnect Device
for this product is the power cord. To remove all
electrical power to the product, disconnect the power cord from the power
receptacle.
•
Your equipment is equipped with an energy saving device to conserve
power when the machine is not in use. The machine may be left on
continuously.
•
Unplug
this product from the wall outlet before cleaning. Always use
materials specifically designated for this product. Use of other materials
may result in poor performance and could create a hazardous situation.
•
Do not
use aerosol cleaners. Follow the instructions in this User Guide for
proper cleaning methods.
•
Never
use supplies or cleaning materials for purposes other than those for
which they were intended. Keep all supplies and materials out of reach of
children.
•
Do not
use this product near water, wet locations, or outdoors.
•
Do not
place this product on an unstable cart, stand or table. The product
may fall, causing personal injury or serious damage to the product.
•
Slots and Openings
in the cabinet and in the back and sides of the product
are provided for ventilation. To ensure reliable operation of the product and
to protect it from overheating, these openings must not be blocked or
covered. The product should never be located near or over a radiator or
heat register. This product should not be placed in a built-in installation
unless proper ventilation is provided.
•
Never
push objects of any kind into the slots of the product as they may
touch dangerous voltage points or short out parts which could result in a fire
or electric shock.
•
Never
spill liquid of any kind on the product.
•
Never
remove covers or guards that require a tool for removal, unless
directed to do so in a Xerox approved maintenance kit.
•
Never
defeat interlock switches. Machines are designed to restrict operator
access to unsafe areas. Covers, guards and interlock switches are
provided to ensure that the machine will not operate with covers opened.
•
Do not
put your hands into the fuser area, located just inside the exit tray
area, as you may be burned.
Summary of Contents for 4150 - WorkCentre B/W Laser
