Xerox 2135N - Phaser Color Laser Printer, Quick Reference Manual

Page: 31 / 199

18
Phaser 2135 Color Printer
A11 Jam Inside Top Cover, Open Cover, See
Labels A11-Paper Feed Jam
1. Ensure the correct weight and type of paper is loaded in the currently used
tray. Also ensure the paper is loaded correctly in the tray.
2. Clean the pick and registration rollers.
3. Ensure there are no obstructions in the paper path.
4. Test the registration motor and clutch as described in “Motor and clutch
tests” on page 69. Replace the motor or clutch if necessary.
5. Inspect the wiring for the registration clutch and registration motor.
6. Replace the engine controller board.
A22 Jam Inside Top cover, Open Cover, See
Labels A22-Feed Path Jam
1. Ensure the correct weight and type of paper is loaded in the currently used
tray. Also ensure the paper is loaded correctly in the tray.
2. Clean the pick and registration rollers.
3. Ensure there are no obstructions in the paper path.
4. Test the registration motor and clutch as described in “Motor and clutch
tests” on page 69. Replace the motor or clutch if necessary.
5. Inspect the wiring for the registration clutch and registration motor.
6. Replace the engine controller board.
B8 Jam Inside Duplex Unit, Open Cover, See
Labels B8-Duplex Jam
1. Ensure the correct weight and type of paper is loaded in the currently used
tray. Also ensure the paper is loaded correctly in the tray.
2. Clean the duplex unit’s rollers.
3. Test the duplex motor and clutch as described in “Motor and clutch tests”
on page 69.
4. Replace the duplex unit.
5. Replace the engine controller board.
B13 Jam Inside Duplex Unit, Open Cover, See
Labels B13-Duplex Inverter Jam
1. Ensure the correct weight and type of paper is loaded in the currently used
tray. Also ensure the paper is loaded correctly in the tray.
2. Inspect and clean the eject rollers behind the fuser unit.
3. Ensure the paper path leading to the duplex unit and the duplex unit’s paper
path are both clear of obstructions.
4. Inspect the operation of the solenoid activated separator gate the direct the
print into the duplex unit. Test the exit solenoid with the “Motor and clutch
tests” on page 69.
5. Replace the duplex unit.
6. Replace the engine controller board.
Printer fault messages
Code Front panel message Service message