Xerox 2135N - Phaser Color Laser Printer, Quick Reference Manual

Page: 109 / 199

96
Phaser 2135 Color Printer
Rear power supply fan
Warning Switch off the power and disconnect the power cord.
1.
Open the top cover. Remove the drum/toner cartridges. Place them in
a lightproof black bag to protect the drum units from light and store in a
safe place.
2.
Remove the electrical card cage as described in “Electrical card cage” on
page 98.
3. Remove the left-side cover as described in “Left-side cover” on page 91.
4.
Remove the left shield plate.
5.
Disconnect the rear power supply fan’s wiring harness from the engine
controller board.
6. Remove the screw securing the fan to the fan duct. Slide the rear power
supply fan out of the duct. Two screws secure the duct in place.
Reverse these steps to install the rear power supply fan. Ensure the fan blows
outward from the printer unit chassis.
Removing the rear power supply fan
Remove
Screws
0725-20
Rear Power Supply
and Duct Fan
Air Flow