Xerox 2135N - Phaser Color Laser Printer, Quick Reference Manual

Page: 83 / 199

70
Phaser 2135 Color Printer
Motor and clutch test constraints
Motor or clutch displayed
on control panel
Constraints
displayed on
control panel
Details
BLACK-ID MOTOR REMOVE ID Run test with the drum units removed.
Observe the imaging drum drive gear rotate
YELLOW-ID MOTOR REMOVE ID Run test with the drum units removed.
Observe the imaging drum drive gear rotate
MAGENTA-ID MOTOR REMOVE ID Run test with the drum units removed.
Observe the imaging drum drive gear rotate
CYAN-ID MOTOR REMOVE ID Run test with the drum units removed.
Observe the imaging drum drive gear rotate
TRANSFER BELT MOTOR REMOVE ID Run test with the drum units removed.
FUSER MOTOR none Remove the fuser and observe the fuser
drive gears turn.
REGISTRATION MOTOR Remove media
from the
multi-sheet bypass
feeder Remove the imaging drums and observe
the registration roller B rotate
REGISTRATION CLUTCH none Open the front cover and observe
registration roller A turning
FRONT MOTOR
(REGISTRATION MOTOR) Remove media
from the
multi-sheet bypass
feeder Open the multi-sheet bypass feeder and
observe the paper position plate cycle up
and down
REGISTRATION SHUTTER none Remove the imaging drums and the
transfer belt to watch the shutter open
and close smoothly and completely.
EXIT SOLENOID none Open the top cover and observe the exit
gate move up and down
FACEDOWN SOLENOID none Open the face-up tray and observe the
facedown gate move up and down
DUPLEX MOTOR none Listen for the motor turning for about 5
seconds
DUPLEX REAR CLUTCH none Listen for the clutch activating
DUPLEX FRONT CLUTCH none Listen for the clutch activating
TRAY 1 MOTOR
(FEED MOTOR) EXIT TRAY1
CASSETTE Run the test with Tray 1 removed.
Observe the pick roller rotate as the
motor runs
TRAY 2 MOTOR
(FEED MOTOR) EXIT TRAY2
CASSETTE Run the test with Tray 2 removed.
Observe the pick roller rotate as the
motor runs