Xerox 2135N - Phaser Color Laser Printer, Quick Reference Manual

Page: 79 / 199

66
Phaser 2135 Color Printer
Lower Fuser
Thermistor - 00F Switch Scan 09
3= Encoded fuser
roller temperature Temperature is encoded as a
hexidecimal value. The default is
between 001 and0 D4.
not used Switch Scan 09
4= not used
Humidity Sensor Switch Scan 10
1= Encoded
environmental
humidity Ambient environmental humidity is
encoded as a hexidecimal value. The
default is between 158 and 2A7.
Temperature
Sensor Switch Scan 10
2= Encoded
environmental
temperature Ambient environmental temperature is
encoded as a hexidecimal value. The
default is between 0E7 and 27C.
not used Switch Scan 10
3= not used
not used Switch Scan 10
4= not used
Duplex In Sensor Switch Scan 11
1= L - Deactuated
H - Paper present Pull out the duplex unit. Lift its cover.
Place a sheet of paper inside on the
sensor flag. Close the cover. Reinsert
the duplex unit in the printer.
Duplex Rear
Sensor Switch Scan 11
2= L - Deactuated
H - Paper present Pull out the duplex unit. Lift its cover.
Place a sheet of paper inside on the
sensor flag. Close the cover. Reinsert
the duplex unit in the printer.
not used Switch Scan 11
3= not used
Duplex Front
Sensor Switch Scan 11
4= L - Deactuated
H - Paper present Pull out the duplex unit. Lift its cover.
Place a sheet of paper inside on the
sensor flag. Close the cover. Reinsert
the duplex unit in the printer.
Tray 2, Size 1
Switch - (Top) Switch Scan 12
1= L - Actuated
H - Deactuated Remove the tray and actuate the sensor
flags at the rear of the tray cavity
Tray 2, Size 2
Switch Switch Scan 12
2= L - Actuated
H - Deactuated
Tray 2, Size 3
Switch Switch Scan 12
3= L - Actuated
H - Deactuated
Tray 2, Size 4
Switch - (Bottom) Switch Scan 12
4= L - Actuated
H - Deactuated
Tray 2 No Paper
Sensor Switch Scan 13
1= L - Paper present
H - No paper Pull tray out to test sensor
Tray 2 Low Paper
Sensor Switch Scan 13
2= L - Paper level OK
H - Low paper Pull tray out to test sensor
not used Switch Scan 13
3= not used
not used Switch Scan 13
4= not used
Right Door Tray 2 Switch Scan 14
1= L - Opened
H - Closed Open door to test sensor
not used Switch Scan 14
2= not used
Tray 2 Feed
Sensor Switch Scan 14
3= L - Actuated
H - Deactuated Open the Tray 2 right-side door and
toggle sensor flag below the feed rollers
not used Switch Scan 14
4= not used
Switch scans and the sensor and switches test
Switch or sensor Switch scan test Test result Details