XENO XDR5, Setup And User'S Manual

Page: 165 / 231

165
Xeno XDR5 real time DVRs manual V1.0
9.7 Setting Alarm Response Actions
Purpose:
Alarm response actions will be activated when an alarm or exception occurs, including Full Screen Monitoring(Quad
View only for Sensor Input), Audible Warning (buzzer), Notify Client Host, Upload Captured Pictures to FTP, Trigger
Relay Output and Send Email.
Full Screen Monitoring
When an alarm is triggered, the local monitor (VGA or BNC monitor) display in full screen the video image from the
alarming channel configured for full screen monitoring.
If alarms are triggered simultaneously in several channels, their full-screen images will be switched at an interval of 10
seconds (default dwell time). A different dwell time can be set by going to Menu > Display > Live View> Event
Sequence Dwell Time.
Auto-switch will terminate once the alarm stops and you will be taken back to the Live View interface.
Note:
You must select during “Trigger Channel” settings the channel(s) you want to make full screen monitoring.
Audible Warning
Trigger an audible beep when an alarm is detected.
Notify Client Host
Sends an exception or alarm signal to remote alarm host when an event occurs. The alarm host refers to the PC
installed with Remote Client.
Note: The alarm signal will be transmitted automatically at detection mode when remote alarm host is configured.
Please refer to Chapter 9.2.7 for details of alarm host configuration.
Upload Captured Pictures to FTP
Capture the image when an alarm is triggered and upload the picture to a FTP server.
Note: Please set up FTP address and the remote FTP server first.
Email Linkage
Send an email with alarm information to a user or users when an alarm is detected.
Please refer to Chapter 9.2.3 for details of Email configuration.