XENO XDR5, Setup And User'S Manual

Page: 99 / 231

99
Xeno XDR5 real time DVRs manual V1.0
6.9 Configuring HDD Group for Recording and
Capture
Purpose:
You can group the HDDs and save the record files and captured pictures in certain HDD group.
Steps:
1. Enter HDD setting interface.
Menu>System>Disk
Figure 5.39 HDD General
2. Select General
Check whether the storage mode of the HDD is Group. If not, set it to Group. For detailed information, please
refer to
Chapter 10.4 Managing HDD Group .
3. Select Advanced in the left bar.
Click to enter editing interface.
4. Configuring HDD group.
1) Choose a group number for the HDD group.
2) Click Apply and then in the pop-up message box, click Yes to save your settings.
3) Click OK to back to the upper level menu.
Repeat the above steps to configure more HDD groups.
5. Choose the Channels which you want to save the record files and captured pictures in the HDD group.
1) Select General.
2) Choose Group number in the dropdown list of Record on HDD Group
3) Check the channels you want to save in this group.
4) Click Apply to save settings.
Note: After you have configured the HDD groups, you can configure the Recording and Capture settings
following the procedure provided in Chapter 5.2-5.7 .